{"kind":"task","effective_mode":"full","benchmark":{"kind":"benchmark","effective_mode":"full","slug":"mmlu-pro","formal_name":"MMLU-Pro","introduction":"MMLU-Pro rebuilds MMLU with ten answer options instead of four and removes items that no longer separate models. Questions span fourteen academic and professional subjects.","introduction_ja":"","introduction_en":"","category":"Category not supplied","task_count":null,"acquisition_status":"Acquisition status not supplied","official_url":"https://huggingface.co/datasets/TIGER-Lab/MMLU-Pro","indexing_mode":"index","profile":{"resources":[],"task_format":"","scoring":"","metric":"","size":"","answer_access":"","license":"","citation":"","maintainer":"","released":"","why_hard":"","related":[],"history":"","construction":"","limitations":"","saturation":"","scores":[]}},"task_id":"76f49d2f-9007-5ffe-950c-cae3a2e5aab6","task_key":"default--test--11979","task_revision_id":"1","upstream_id":"11979","short_description":"A plate loses heat to a stream of air by convection. The plate is2 ft. in…","config":"default","split":"test","body":"{\"category\":\"engineering\",\"options\":\"['(a) 1,800 Btu/hr, (b) 6500 Btu/hr, (c) 14,500 Btu/hr, (d) 55%', '(a) 2,900 Btu/hr, (b) 8100 Btu/hr, (c) 18,000 Btu/hr, (d) 75%', '(a) 1,500 Btu/hr, (b) 6000 Btu/hr, (c) 15,000 Btu/hr, (d) 50%', '(a) 2,400 Btu/hr, (b) 7600 Btu/hr, (c) 15,600 Btu/hr, (d) 65%', '(a) 2,663.3 Btu/hr, (b) 7440.7 Btu/hr, (c) 16,288 Btu/hr, (d) 61%', '(a) 3,200 Btu/hr, (b) 8300 Btu/hr, (c) 19,000 Btu/hr, (d) 78%', '(a) 2,100 Btu/hr, (b) 6800 Btu/hr, (c) 14,800 Btu/hr, (d) 53%', '(a) 3,000 Btu/hr, (b) 8000 Btu/hr, (c) 17,000 Btu/hr, (d) 70%', '(a) 1,200 Btu/hr, (b) 5800 Btu/hr, (c) 13,200 Btu/hr, (d) 45%', '(a) 2,000 Btu/hr, (b) 7000 Btu/hr, (c) 16,000 Btu/hr, (d) 60%']\",\"question\":\"A plate loses heat to a stream of air by convection. The plate is2 ft. in length, and it is initially at a surface temperature of 500°F.The ambient air temperature is 100°F, and the air flowrate is observed to be 150 ft/sec. Assuming a unit (1 ft.) width, calculate (a)theheat transferred from the laminar boundary layer region; and (b)theheat transferred from the turbulent boundary layer region. Then assume that the boundary layer is completely turbulent. Find (c)theheat transfer involved; and (d)theerror this assumption results in.\",\"src\":\"stemez-Thermodynamics\"}","display_format":"text","language":"","answer_status":"published","assets":[],"source_url":"https://huggingface.co/datasets/TIGER-Lab/MMLU-Pro","history":"initial import","indexing_mode":"index","subproblems":[],"grids":[]}