{"kind":"task","effective_mode":"full","benchmark":{"kind":"benchmark","effective_mode":"full","slug":"hellaswag","formal_name":"HellaSwag","introduction":"HellaSwag asks which of four continuations naturally follows a sentence or a video caption. The wrong options are produced by adversarial filtering, so items that are nearly trivial for people remain hard for models.","introduction_ja":"","introduction_en":"","category":"Category not supplied","task_count":null,"acquisition_status":"Acquisition status not supplied","official_url":"https://rowanzellers.com/hellaswag/","indexing_mode":"index","profile":{"resources":[],"task_format":"","scoring":"","metric":"","size":"","answer_access":"","license":"","citation":"","maintainer":"","released":"","why_hard":"","related":[],"history":"","construction":"","limitations":"","saturation":"","scores":[]}},"task_id":"beb477d9-249b-574f-8771-4131ae40c46c","task_key":"default--validation--4868","task_revision_id":"1","upstream_id":"4868","short_description":"HellaSwag validation 4868","config":"default","split":"validation","body":"{\"activity_label\":\"Home and Garden\",\"ctx\":\"[header] How to change a mortise lock cylinder [title] Open door partially to reveal the mortise lock cover plate at the edge of the door. [step] Remove the two retaining screws and set aside. [title] Note the position of the keyway as it relates to the cylinder.\",\"endings\":\"[\\\"[step] If, for instance, a half turn tells you the full profile of the old lock, you must approximate the main combination and the starting and ending positions, regardless of what's on your paint job. [title] Look at the half turn shape used by all locks.\\\", '[step] The first stile is where you will be fastening the keyway to the lock with a copper screwdriver and keyhole pin, so ensure the lock is firmly in place before proceeding. [title] Make sure the correct keyway channel is located between the floor and door jamb.', \\\"[step] Most likely it is at the bottom (six o'clock). [title] Remove the cover plate from the edge of the door and back out the set screw that is preventing the cylinder from turning.\\\", '[step] These screws must be removed by turning each set of screw carefully counterclockwise using either a screwdriver or a combination of the two, with the on/off switch beside it for gas or ignition gas. [substeps] The wires must be flush with the surface of the dial.']\"}","display_format":"text","language":"","answer_status":"published","assets":[],"source_url":"https://rowanzellers.com/hellaswag/","history":"initial import","indexing_mode":"index","subproblems":[],"grids":[]}