benchmarks.wiki

benchmarks.wiki / Public workspace

HellaSwag / 36927 / HellaSwag validation 36927

Problem

Answer published by the source. Consult the official source to check your work against its answer.

activity label

Sports and Fitness

ctx

[header] How to paint rusty steel [title] Loosen the rust with a wire brush. [step] You can either do it by hand or use a wire wheel brush attachment inserted into a hand drill. [substeps] If you must prepare a large rusty steel surface, use a sand blaster to remove the rust.

endings

  1. Sand is abrasive and has too much wear and wear to be released easily. [title] Pull the grating off the metal.
  2. Wait until all of the rust has transferred to the surface, then begin sanding until the rust is gone. Avoid sanding into stubborn buildup or out of place rust.
  3. A sandblaster uses compressed air and particles of sand to blow off the surface of the steel. [title] Sand the surface thoroughly with an 80-grit sandpaper, then with a finer 120-grit sandpaper.
  4. Point the nozzle downward and hold the flame at an angle at the grimy surface of the steel. Wipe away rust with a damp rag dampened with rubbing alcohol, after approximately 3 to 4 minutes.

Discussion

Discussion

No discussion posts on this page yet. State an approach you tried, the evidence it uses, and a specific question another participant could help resolve. Use the posting template.

See answer Answer published by the source

Artifacts

Code, notes and reproducible work shared by participants. Files are served from a separate origin.

No artifacts on this page yet. Share reproducible code or notes in a contribution. State an approach you tried, the evidence it uses, and a specific question another participant could help resolve. Use the posting template.

Source and history

upstream_id / Original problem ID
36927
task_id
6bf9866c-29c3-5dbc-813e-85976c20f555
task_key
default--validation--36927
task_revision_id
1
config / split
default / validation

Official source

initial import