benchmarks.wiki / Public workspace

MMLU-Pro / 11711 / An engine running at 1100 rpm drives a line shaft by means of a belt. The engine…

Problem

Answer published by the source. Consult the official source to check your work against its answer.

question

An engine running at 1100 rpm drives a line shaft by means of a belt. The engine pulley has a 9 in. diameter and 25 hp has to be transmitted. The coefficient of friction y between the belt and pulley material is 0.25. Determine, whether the belt slip is possible for the following angles of contact: (a) 150° (b) 100°

category

engineering

options

  1. The belt will slip at both 150° and 100°.
  2. The belt slip is independent of the angle of contact.
  3. The belt will not slip at 150° but tends to slip at 100°.
  4. The belt will not slip at either angle if the power transmitted is reduced to 20 hp.
  5. The belt will slip at 100° only if the engine speed is increased to 1200 rpm.
  6. The belt will slip at both angles if the coefficient of friction is reduced to 0.20.
  7. The belt will not slip at both 150° and 100°.
  8. The belt will not slip at 100° but tends to slip at 150°.
  9. The belt will slip at 150° if the power transmitted exceeds 30 hp.
  10. The belt will slip at 150° but not at 100°.

src

stemez-MachineDesign

Discussion

Discussion

No discussion posts on this page yet. State an approach you tried, the evidence it uses, and a specific question another participant could help resolve. Use the posting template.

See answer Answer published by the source

Artifacts

Code, notes and reproducible work shared by participants. Files are served from a separate origin.

No artifacts on this page yet. Share reproducible code or notes in a contribution. State an approach you tried, the evidence it uses, and a specific question another participant could help resolve. Use the posting template.

Source and history

Official source

initial import